Your files

Downloads from your past orders are listed here, each linked to the exact ZIP generated for the size, roof and door you chose at checkout.

If a link has expired or you need a plan rebuilt with different options within its declared range, use the contact page and reference your order.

Looking for the free plan instead? It is on the 8x8 Lean-To Shed Plan page, no order needed.

What is inside the ZIP

Each download holds one complete plan set: the cut list with finished lengths, the panel layout for sheet goods, dimensioned views of floor, walls and roof, the assembly order, the bill of materials and the shopping list grouped by stock length. Bundles add a start-here page indexing every plan in the file, so you can print only the size you are building.

Printing the plan

The sheets are laid out for letter or A4 at 100 percent scale. Print at actual size rather than fit to page: the dimensions are written in full on every view, so a scaled print stays readable, but a plan printed at true size can be measured directly with a rule. Printing the cut list separately and taping it inside the shed door saves a lot of walking during the build.

Rebuilding a plan

If you change your mind about a door or a roof style before building, a plan can be rebuilt within its declared option range at no extra cost. Write from the contact page with the email address used at checkout and the configuration you want instead.

Download, verify, and store the ZIP

Use a desktop or laptop for the first download if possible. A plan ZIP is easier to check on a screen that can show the folder tree, the PDF page size, and the file name at the same time. Save the ZIP before opening it. Do not work from a browser preview, because some previews hide page size, page count, or the download name.

Download the ZIP to a known folder, for example a folder named Shed Plan on your desktop.
Copy the ZIP once before extracting it. Keep one untouched copy as your original file.
Extract the ZIP into a folder with the same project name, for example 10x12 gable shed.
Open the index or main PDF first, then confirm that the shed size, roof type, and door choice match your order.
Print one test page at 100 percent and measure a known scale mark or dimension line before printing the rest.
Make a second backup on a USB drive or cloud folder before the build starts.

File names are often the fastest way to avoid using the wrong drawing on the job. If you own more than one plan, rename the extracted folder with the outside size, roof, door position, and date. Do not rename individual PDF pages after extraction unless you also keep the original ZIP, because the original names help identify the generated set if you need support.

If you need to compare available plan types before deciding what to build, use shed plans before asking for a rebuild. That prevents changing a file to an option that does not belong to the same declared range.

Equipment, file checks, and working dimensions

Most plan handling problems come from printing, not from the PDF itself. Check the printer settings before you spend paper. A plan can be readable when scaled, but a scaled page should not be used as a measuring source. The written dimensions control the work.

Item	Practical figure	Use on site
Paper size	Letter or A4	Use one size for the whole plan set so page alignment and margins stay consistent.
Print scale	100 percent	Use actual size for any page you may measure with a rule.
Working copy	1 clean copy and 1 marked copy	Keep the clean copy indoors and mark cuts, changes, and completed steps on the job copy.
Screen check	100 to 150 percent zoom	Use this range to read small labels without mistaking similar fractions.
Folder backup	2 separate locations	Store one copy on the computer and one on a removable drive or cloud folder.
Job binder	1 inch binder or clipboard	Protects the cut list, wall drawings, and roof drawings from wind and moisture.

For layout work, keep a pencil, tape measure, framing square, calculator, and highlighter beside the printed sheets. Highlight only one building stage at a time. For example, mark floor framing first, then wall framing, then roof framing. This reduces the risk of cutting roof parts while reading a wall section.

If your printer clips an edge, open the print dialog and check the preview margin. Do not switch to fit to page unless you are printing a reading copy only. If the page must be reduced to fit your printer, write Reduced copy on the first page so it is not used for scaling later.

Frequent mistakes and recovery

If the ZIP opens but a PDF will not open, extract the ZIP again into a new folder. Opening a PDF directly from inside a compressed ZIP can fail on some systems. If the second extraction fails too, download the ZIP again before assuming the plan is damaged.

If a link no longer opens, note the order email, the approximate order date, and the configuration you expected. Send those details in one message. A clear request is faster than several short messages because the file can be matched to the original generated order.

If you printed at the wrong scale, do not throw the sheets away. Keep them as a reading copy and print only the pages you need at actual size. Write Not to scale on the reduced copy with a marker. This matters because a reduced wall drawing can still look correct until someone lays a ruler on it.

If you find two similar folders, compare the main page or file name before cutting lumber. A common error is using a bill of materials from one size and a cut list from another. Recovery is simple before cutting, but expensive after cutting. Stop, mark each folder with the shed size, and use only one folder for the rest of the build.

If your device blocks the download, try a different browser or download from a computer instead of a phone. Some phones save ZIP files inside an app folder that is hard to find later. After downloading, email the ZIP to yourself or move it to a named project folder.

Special cases before the build starts

For a shared build, give every helper the same dated PDF copy. Do not let one person work from a phone screenshot and another from a printed plan. Screenshots can crop notes, sheet labels, or dimensions. If a helper needs only one task, print that task page and write the task name at the top.

For a build delayed by several months, open the stored ZIP before buying materials. Confirm that the file is still accessible, that the pages print correctly, and that the plan still matches the shed you intend to build. This check takes about 10 minutes and avoids discovering a file problem on the morning you planned to cut.

For mixed paper sizes, print the full set again on one paper size if you will keep the pages in a binder. Letter and A4 sheets mixed together can hide page numbers and make field notes harder to compare. If you must mix sizes, write the page number and section title in the same corner on every sheet.

For questions about account access, downloads, or plan use, check the FAQ before sending a support request. Include the exact shed size and roof type in any message, because those details identify the generated file more reliably than a general description such as small shed or garden shed.

Your order

Loading your order.